Our rope wall is 14 metres high, and there are two ways to climb it. You can clip into one of the six auto-belays on the front wall and climb on your own, or climb on top-rope with a partner who belays you. Both are open to every visitor, with a few rules.
How the auto-belays work
An auto-belay is a device at the top of the wall that takes in the rope as you climb and lowers you slowly when you let go. You clip into it with the carabiner on the strap, a staff member checks your first climb, and then you can climb whenever a line is free.
Always check that the gate is closed and locked on your harness belay loop before you leave the floor, and make sure the landing zone below you is clear.
How top-rope works
On top-rope, the rope runs from your harness up to an anchor at the top of the wall and back down to your belayer. The belayer takes in rope as you climb and lowers you at the end. It needs two people, and the belayer must pass our belay check.
Which to try first
For your very first climbs, the auto-belays are the simplest start: no knots and no partner needed. Once you know you enjoy climbing tall walls, the Learn to climb course teaches you to tie in and belay, which opens up all 38 rope lines.
Many climbers keep using both. The auto-belays are good for laps on a quiet weekday evening, and top-rope is good for climbing with friends.
The belay check
Anyone who wants to belay at Basalt passes a short check with a staff member first. You tie in with a figure eight knot, belay a climber up and lower them smoothly. If you pass, you get a belay tag on your membership. If you are not ready, a belay class covers it in 90 minutes.
