GT Crate · live demo with sample contentGet this themeAll demos

Mon–Sat 11:00–20:00 · Sun 12:00–18:00 · Free gigs most Fridays · 247 W Clayton St, Athens, GA 30601 Call +1 (706) 555-0137

Setting up your first turntable: level, tracking force and anti-skate

Four adjustments decide how your records sound and how long they last. None of them take special tools.

·

Detailed view of a turntable needle on a spinning vinyl record, capturing the essence of analog music.

A turntable set up badly can sound thin, distort on loud passages and wear your records faster than it should. A turntable set up well disappears and lets the music through. The good news is that most of the work takes twenty minutes and a few simple tools. These are the four adjustments we make on every player that crosses our bench.

Start with a level surface

A turntable needs a flat, solid surface away from the speakers. Put a small bubble level on the platter and adjust the feet, or shim the shelf, until the bubble sits in the middle in both directions. A tilted deck pulls the stylus toward one wall of the groove.

Keep it off the same piece of furniture as the speakers if you can. Bass travels through wood and back into the stylus as a low hum or feedback.

Set the tracking force

Tracking force is how hard the stylus presses into the groove, and every cartridge maker lists a range in grams. First balance the tonearm with the counterweight so it floats level, then set the dial to zero and turn the weight to the recommended force.

Too light and the stylus skates and mistracks loud passages. Too heavy and it wears both stylus and record. A digital stylus gauge costs about $20 and is worth having.

Anti-skate and alignment

Anti-skate pushes the arm gently outward to balance the pull toward the centre. Set it to the same number as your tracking force as a starting point.

Alignment means the cartridge sits at the correct angle in the headshell. Many players ship with a paper protractor; print one if yours did not. A misaligned cartridge sounds harsh on the inner tracks of each side.

Or let us do it

Our turntable setup costs $45 and covers all four adjustments, plus a check of speed, belt and cables. Bring the player in its box with the cartridge, and pick it up later the same day.