GT Engine · live demo with sample contentGet this themeAll demos

Mon–Fri 8:00–17:30 · Sat 9:00–14:00 · 1518 Main Ave, Fargo, ND 58103 Call +1 (701) 555-0148

The spring mower checklist: what to do before the first cut

Plug, oil, air filter, blade and tires: the 20-minute spring check that keeps your mower out of the May queue.

·

Photo showing a close-up of a lawn mower cutting fresh green grass on a sunny day.

In Fargo the grass usually needs its first cut in late April. By then our bench has a two-week wait, so it pays to check your mower in March, while the snow is still melting.

Start with a test start

Before you change anything, see whether the mower starts on fresh fuel. If it starts and runs smoothly without choke, you are in good shape. If it only runs on choke or surges, the carburetor needs attention, and it is worth booking early.

Plug, oil and air filter

Replace the spark plug every season. It costs a few dollars and makes starting easier. Check the gap with a gauge before you fit it.

If you did not change the oil in the fall, change it now. Then look at the air filter: paper filters should be replaced when they are dirty, foam filters can be washed in warm soapy water, dried and lightly oiled.

Blade and deck

Disconnect the plug wire before you go near the blade. A dull blade tears the grass instead of cutting it, and torn tips turn brown and invite disease. A blade should be sharpened at least once a season, and balanced afterwards so it does not shake the engine.

Check the underside of the deck for rust holes and packed clippings, and scrape it clean.

Wheels, cables and riders

Check that the wheels turn freely and the height adjusters lock. On self-propelled mowers, check the drive cable and the belt. On riding mowers, check the tire pressure, charge the battery and look at the deck belt for cracks.

If you would rather hand it over, our spring tune-up does all of this from $79. Book in March and we usually have it back within the week.