Tube amps are simple machines, and most of their faults announce themselves with a sound. Learning to tell those sounds apart helps you decide whether it is a five-minute fix or a trip to the bench. One rule comes first: a tube amp stores lethal voltages inside, even when it is unplugged. Never open the chassis yourself.
A steady hum
First, unplug the guitar and every pedal. If the hum stops, the fault is in a cable, a pedal power supply or a single-coil pickup near a light dimmer. If it carries on with nothing plugged in, the amp itself needs a look, often a tired filter capacitor or a ground fault.
Crackle when you turn a knob
Scratchy pots and jacks are the most common amp complaint we see, and the least serious. Dust and oxidation build up inside them, and a proper clean or a new part sorts it out. Turning a knob back and forth a few times can help for a while, but the noise returns.
Pops, cutting out and loss of volume
Random pops, a sudden drop in volume or a tone that turns thin and fizzy often mean a power tube is failing. Look for a tube that glows much brighter than its neighbours or not at all, then switch the amp off and bring it in. Running an amp with a failing tube can take out other parts with it.
What a service includes
Our amp diagnosis costs $49 and is credited to the repair if you go ahead. We test the tubes, check the bias, clean the controls and jacks, inspect the solder joints and run the amp at volume for an hour. You get a written price before we change anything, and we keep the old parts for you.
