GT Lube · live demo with sample contentGet this themeAll demos

No appointment needed · Mon–Fri 7:30–19:00 · Sat 8:00–17:00 · Sun 10:00–16:00 · 2955 N Rock Rd, Wichita, KS 67226 Call +1 (316) 555-0137

Which oil does my car need? Reading the numbers on the bottle

0W-20, 5W-30, synthetic blend: what the numbers mean, where to find the right grade and why thinner is not always cheaper.

·

Close-up of essential oil bottle droppers on a wooden shelf in a store setting.

Every week a driver pulls into our bay and asks for “the good stuff”. The honest answer is that the best oil for your engine is the one printed in your owner’s manual, and the numbers on the bottle tell you whether you have it.

What 5W-30 actually means

The first number, with the W, describes how easily the oil flows when the engine is cold. W stands for winter, not weight. A 0W oil flows faster on a January morning in Wichita than a 10W oil, so it reaches the top of the engine sooner after start-up.

The second number describes how thick the oil stays once the engine is at full temperature. A 30 holds a slightly thicker film than a 20. Engines are built with tight gaps for one particular thickness, which is why the manual is specific.

Where to find your grade

Look in the maintenance section of the owner’s manual, on the oil filler cap under the hood, or on a sticker inside the door frame. Many engines since 2015 call for 0W-20 or even 0W-16. Using a thicker oil in these does not protect them better; it can slow the oil down in the first seconds after a cold start, when most wear happens.

If you have lost the manual, we look your grade up from the vehicle identification number on the tablet at your window before we pour anything.

Conventional, blend or full synthetic?

Conventional oil is refined from crude oil and works well in older, simpler engines with short intervals. Full synthetic is engineered for consistent molecules, resists breaking down in heat and lasts longer between changes. Most turbocharged and direct-injection engines require it, and the manual will say so.

Synthetic blends sit in the middle. They are a reasonable choice for an older engine that does a lot of short trips, but if your manual says full synthetic, a blend does not meet the warranty.

The short version

Match the grade on the cap, use synthetic if the manual asks for it, and change it on time. Our full synthetic change is $79.99 with up to five quarts and a new filter, and the grade we pour is printed on your receipt.