GT Pane · live demo with sample contentGet this themeAll demos

Free quotes · Mon–Fri 7:30–17:30 · Sat 9:00–13:00 · 3108 1st Ave N, Billings, MT 59101 Call +1 (406) 555-0147

Keeping a glass shower door clear and dripping-free

Hard water, worn sweeps and loose hinges: the small habits and cheap parts that keep a shower door working for years.

·

Close-up of raindrops on glass with a blurred nature background, creating a serene and artistic effect.

Billings water is hard, and a glass shower door shows it. White spots, a door that drips onto the floor and rollers that grind are the three things we hear about most, and all of them are easier to prevent than to fix.

Squeegee after every shower

Thirty seconds with a squeegee removes the water before the minerals dry on the glass. It does more than any cleaner. Hang the squeegee inside the shower so nobody has to remember where it is.

Clean gently

For build-up that is already there, use white vinegar or a cleaner made for glass showers, with a soft sponge. Avoid scouring pads and powders: they scratch the glass, and the scratches hold more scale than before.

Replace the sweep and seals

The rubber strip along the bottom of the door and the seals along the edges harden and split after a few years. That is when water starts reaching the floor. New sweeps and seals cost little and take us about half an hour to fit.

Listen to the rollers and hinges

A sliding door that grinds or jumps its track has worn rollers, and a hinged door that drops at the handle side has a loose or tired hinge. Both get worse quickly and put strain on the glass. We carry rollers and hinges for most doors on the van, so most fixes take one visit.

If the glass itself is damaged

Shower door glass is tempered, so it cannot be cut or patched. A chipped edge on tempered glass can make the whole pane fail without warning, so if you see one, stop using the door and call us for a new pane made to size.