Most files that come back to us for fixes have the same problem: the design stops exactly at the edge of the page. A press cannot print to the very edge of a sheet, so we print on a larger sheet and cut it down. Bleed, trim and safe zone are the three lines that make that cut look clean.
Bleed: extend the background
Bleed is the part of your design that runs past the finished edge and gets cut off. For business cards, flyers and postcards we ask for 0.125 inch on every side, so a 3.5 × 2 inch card becomes a 3.75 × 2.25 inch file. Any photo, colour or pattern that touches the edge should stretch all the way into the bleed.
Without bleed, a tiny shift in the cutter leaves a thin white line along one side. Every guillotine moves a fraction of a millimetre between cuts, and on a stack of 500 cards that fraction shows.
Trim: the finished size
The trim line is where the blade falls. It is the size you ordered, and it is the size you should design to. If you build a file at the finished size and add bleed afterwards, check that nothing important moved when the canvas grew.
Large-format work has its own version: banners get a hem and grommets, so we ask for one inch of plain background around the edge instead of 0.125 inch.
Safe zone: keep the words inside
The safe zone sits 0.125 inch inside the trim line. Text, logos, phone numbers and QR codes belong inside it. Anything between the safe line and the trim may be cut, or may simply look cramped against the edge.
A thin border running right around a card is the hardest design to cut well, because even a small shift makes one side wider than the other. If you love borders, make them thick, at least a quarter of an inch.
Before you send the file
Export a PDF with crop marks and bleed included, fonts embedded or converted to outlines, and images at 300 dpi at the printed size. If you are not sure, send what you have: every order at Mesa Ink gets a free file check by a person and a digital proof before anything is printed.
