Ovens drift. A temperature sensor ages, a heating element weakens, or a door seal hardens, and slowly the oven that baked perfect bread starts to burn cookies. Before you blame the recipe or call a technician, find out what the oven is really doing.
Use an oven thermometer
Buy an inexpensive oven thermometer and hang it from the middle rack. Set the oven to 350°F and wait twenty minutes after the preheat signal. Read the thermometer through the window, then again ten and twenty minutes later.
Every oven cycles a little above and below the set point, so take the average of the three readings. Within 15 degrees is normal.
Calibrate if the offset is steady
If the oven is always about 20 or 25 degrees off, most digital controls let you adjust the offset. The steps are in your manual, often under “temperature adjustment”. That is a free fix.
Look at the elements and the seal
On electric ovens, look for blisters or a dull spot on the bake element. Feel around the door with the oven on: warm air escaping means the gasket is worn. On gas ovens, a slow-to-light burner can mean a weak igniter.
When to book a visit
If the temperature swings widely, the oven will not heat at all, or the display shows an error, book us. A bake element replacement starts at $135. Gas ranges are serviced by our licensed technicians, and we test every repair with a thermometer before we leave.
One safety note: if you ever smell gas near the range, do not test anything. Turn off the burners, leave the house and call your gas company’s emergency line first. We repair the appliance once the supply has been checked and made safe.
