GT Chrome · live demo with sample contentGet this themeAll demos

Mon–Fri 8:00–17:00 · Sat by appointment · 1830 Lake St, Kalamazoo, MI 49001 Call +1 (269) 555-0148

How to judge rust before you buy a project car

Bubbles in the paint are the part you can see. Here is where to look for the rust that decides the budget.

·

a close up of a metal object with screws on it

Most project cars are bought for the shape and paid for in steel. The asking price matters far less than how much metal has to be cut out and replaced, and that is something you can judge in half an hour with a flashlight, a magnet and a pair of old clothes.

Start underneath

Rust starts where water sits. Lie on a mat and look at the floor pans, the torque boxes or frame rails, the rocker panels from below and the trunk floor where it meets the rear valance. Surface rust that brushes off with a glove is cosmetic. Flaking scale, soft spots or daylight are not.

Press hard on suspect areas with your thumb. If the metal flexes or crunches, assume the panel needs replacing, and assume the panel next to it is worse than it looks.

Bring a magnet

A fridge magnet wrapped in a cloth will not stick to thick body filler. Slide it along the lower doors, wheel arches and rear quarters. Where it falls away, someone has filled rust instead of cutting it out, and we will have to undo that work before we can start ours.

Filler is not always a disaster: a thin skim over a sound panel is normal. Half an inch over a hole is a repair waiting to fail.

Count the panels, not the spots

When owners ask us for an estimate, we count panels. A floor pan, a pair of rockers and two quarters is a typical Midwest car, and at our shop that is roughly 180 to 260 hours of metalwork before any paint.

A dry car from the South or West with a higher price can easily be the cheaper restoration. Pay for straight steel once, rather than paying us to make it.

Ask for an assessment

If you are serious about a car, our $250 assessment puts it on the lift for a day. You get photos of every problem area, an hour count for the metal and a budget range, and the fee is credited if we do the work.